Page 1 of 4
Microneedle electrode (ME) is used to monitor bioelectrical signals by penetrating via the skin, and it compensates for a limitation of surface electrodes. However, existing fabrication of ME have limited in c...
In this study, we present a method to quantitatively analyze the thrombus formation process through image analysis in an in vitro thrombus model with a circular cross section. The thrombus model used was desig...
Unique self-assembled germanium structures known as Germanium-on-Nothing (GON), which are fabricated via annealing, have buried multiscale cavities with different morphologies. Due to their unique sub-surface ...
Silicon bulk micromachining is extensively employed method in microelectromechanical systems (MEMS) for the formation of freestanding (e.g., cantilevers) and fixed (e.g., cavities) microstructures. Wet anisotr...
The separation of biological cells or microorganisms in a liquid based on their size by deterministic lateral displacement is widely used in laboratories. The analytical equation for the critical diameter is d...
Neural interfaces are fundamental tools for transmitting information from the nervous system. Research on the immune response of an invasive neural interface is a field that requires continuous effort. Various...
Multiple lesions in the same vessel is one of the most common situations found in patients suffering from cardiovascular diseases, this complicates not only the assessment of the severity of each one but also ...
The development of high-performance strain sensors has attracted significant attention in the field of smart wearable devices. However, stretchable strain sensors usually suffer from a trade-off between sensit...
To overcome the limitations of muscle-based prostheses, studies on nerve-based prostheses for sensory feedback have recently been reported. To develop such prostheses, intrafascicular electrodes, a type of per...
In this study, a pneumatic dispenser driven by a flexible membrane with a capacitive-type sensor using an SLA-type 3D printer was fabricated. It was confirmed that a single droplet in the range of approximatel...
Extracellular vesicles (EVs) are nano-sized vesicles derived from cells that transport biomaterials between cells through biofluids. Due to their biological role and components, they are considered as potentia...
Metal oxide-based sensors have been widely used to detection biomarkers in exhaled breath for identification of various diseases such as asthma, diabetes, halitosis, and lung cancer. Herein, we proposed one st...
During deep reactive ion etching (DRIE), microscale etch masks with small opening such as trenches or holes suffer from limited aspect ratio because diffusion of reactive ions and free radicals become progress...
A microarray detection method based on on-chip signal amplification using terminal deoxynucleotidyl transferase (TdT) was developed to visualize pathogenic genes. Cyclic olefin copolymer (COC) substrate for mi...
Silicon wet bulk micromachining is the most widely used technique for the fabrication of diverse microstructures such as cantilevers, cavities, etc. in laboratory as well as in industry for micro-electromechan...
Soft devices that are mechanically flexible and stretchable are considered as the building blocks for various applications ranging from wearable devices to robotics. Among the many candidate materials for cons...
Wearable electronic devices such as mobile communication devices, portable computers, and various sensors are the latest significant innovations in technology which use the Internet of Things (IoT) to track pe...
Precise sensing of pressure is essential for various mechanical and electrical systems. The recent emergence of flexible pressure sensors has enabled novel applications, such as human–machine interfaces, soft ...
We propose a scheme to establish a surrogate model for optimizing the annealing duration of the self-assembled membrane-cavity structures from hole patterned silicon wafers. Although it has been reported that ...
The phytosynthesis method was used to prepare ZnO nanoparticles (ZnO NPs) via Senna alata L. leaf extract (SALE) by involving alkaloids, which play an essential role as a source of weak bases during the formation...
Gaseous ethanol detection has attracted significant interest owing to its practical applications such as in breath analysis, chemical process monitoring, and safety evaluations of food packaging. In this study...
In this study, the sensing characteristics of tin oxide-based gas sensors deposit with different amounts of metalloporphyrin, which is a functionalization substance, are evaluated. The mass of metalloporphyrin...
The present study is focused on the synthesis of silver nanoparticles (AgNPs) utilizing endophytic fungus Talaromyces purpureogenus, isolated from Taxus baccata Linn. Extracellular extract of Talaromyces purpureo...
Here, we report a very sensitive, non-contact, ratio-metric, and robust luminescence-based temperature sensing using a combination of conventional photoluminescence (PL) and negative thermal quenching (NTQ) me...
We demonstrate a two-step hybrid process for fabricating movable parts inside glass substrate using the selective laser-induced etching (SLE) process that is consisted of laser-direct writing and wet chemical ...
Uniform deposition across large areas of an organic layer is one of the challenges for the industrial application of solution-based organic light‐emitting diode (OLED). In this paper, we propose an organic thi...
The present work proposes a method for fabricating metallic Al particles in aqueous solution. An aqueous colloidal solution was prepared from an aqueous aluminum nitrate nonahydrate solution by electrolysis us...
LC CMOS voltage-controlled oscillators (VCOs) with tunable inductors are essential for high-performance, multi-band communication systems, such as IoT applications and 5G communication. However, VCOs that use ...
Colloidal Silver nano-particles were grown at room temperature using leaf extract of Ocimum tenuiflorum. The silver nanoparticles suspended in the solution were found to be stable for over a period of 2 months. S...
Conventional pain assessment methods such as patients’ self-reporting restrict the possibility of easy pain monitoring while pain serves as an important role in clinical practice. Here we report a pain assessm...
In the present work, gas sensor arrays consisted of four different sensing materials based on CuO and their depositions on the MEMS microheaters were designed, fabricated and characterized. The sensor array is...
Studies related to low temperature and their effect on cardiomyocytes are essential as hypothermia—like situations have been known to induce arrhythmia or ventricular fibrillation. Till date, several studies h...
Gold nanoparticles (Au NPs) based technology has been shown to possess enormous potential in the viral nucleic acid diagnosis. Despite significant advancement in this domain, the existing literature reveals th...
Bicelle is one of the most stable phospholipid assemblies, which has tremendous applications in the research areas for drug delivery or structural studies of membrane proteins owing to its bio-membrane mimicki...
Thickness-controlled transparent conducting films (TCFs) were fabricated by transfer printing a 100 nm thick Cu micromesh structure onto poly(vinyl alcohol) (PVA) substrates of different thicknesses (~ 50, ~ 8...
Nanotechnology holds an emerging domain of medical science as it can be utilized virtually in all areas. Phyto-constituents are valuable and encouraging candidates for synthesizing green silver nanoparticles (...
Wet anisotropic etching is extensively employed in silicon bulk micromachining to fabricate microstructures for various applications in the field of microelectromechanical systems (MEMS). In addition, it is mo...
Energy crisis and environmental pollution have been one of the major global issues. In this regard, the search for new energy storage materials is cheap, flexible and high-performance supercapacitors electrode...
Electronic skin (E-skin) capable of detecting various physical stimuli is required for monitoring external environments accurately. Here, we report an all-soft multiaxial force sensor based on liquid metal mic...
The present research work reports on the fabrication of ultraviolet (UV) photodetectors using bismuth ferrite (BiFeO3, BFO) thin films with varying thickness. Using the spray pyrolysis technique, BFO thin films w...
We propose a highly sensitive capacitive pressure sensor made of hollow polydimethylsiloxane (PDMS) foam with a three-dimensional network structure. The stiffness of the foam is adjusted by the viscosity of th...
An amendment to this paper has been published and can be accessed via the original article.
The original article was published in Micro and Nano Systems Letters 2020 8:16
This paper proposes a new design of bimorph-type electrothermal actuators based on flexible Ni-Co substrates and describes the results of the finite element method (FEM) simulation and performance evaluation o...
The extraordinary enhancement in heat transfer efficiency of nanofluids at extremely low volume fractions has attracted a lot of attention in identifying the governing mechanisms. The nanoscale effects, Browni...
We present a method to fabricate planar metal layers to be used as micromachined mirrors. Released mirrors of pure metal involve severe stress and reveal specific challenges to obtain planar mirror structures....
A comparative study of elastic properties and mode I fracture energy has been presented between conventional carbon fibre (CF)/epoxy and advanced carbon nanotube (CNT)/epoxy laminated composite materials. The ...
Preterm infants are prone to have higher risks of morbidity, disability and developmental delay compared to term infants. The primitive reflexes, inborn behaviors found in early life development, are shown to ...
Recently, as the concentration of fine dust in the atmosphere has increased due to an increase in the use of fossil fuel power plants, automobiles, and factories, it has been increasingly important to measure ...
This paper reports doubly clamped microchannel embedded resonators with two independent and parallel channels integrated for effective sample density tuning for the first time. With the aid of such a unique de...
The Correction to this article has been published in Micro and Nano Systems Letters 2020 8:23
Rapid diagnosis and treatment are required when blood clots build up in a blood vessel and clog up the vessel. This study proposes novel smart catheters that can simultaneously diagnose and treat blood vessel ...
