Skip to main content
Micro and Nano Systems Letters
Fig. 2 | Micro and Nano Systems Letters

Fig. 2

From: Microfluidic thrombosis analysis system: possibilities and limitations

Fig. 2

Adapted from Westein et al. PNAS 2013;110(4):1357–1362 [18]. b Molds having in-vivo shapes were manufactured using an SLA-based 3D printer. Thrombus formation between healthy human vessels and patients with stenosis was compared by perfusing blood into PDMS channels. Reproduced from Costa et al. Lab Chip 2017;17:2785–2792 [25]

Microfluidic chips utilized in thrombosis research. a Microchannel created using soft lithography. Thrombus formation by perfusing blood into channels where endothelial cells were cultured.

Back to article page